AMICO® produces Fiberglass Reinforced Plastic (FRP) components that can be used in a variety of environments. These products eliminate the need for grounding and are non-corrosive with built in UV resistant coatings.
GatorGrate™ FRP Panel
GatorGrate™ molded grating is a one-piece fiberglass reinforced plastic (FRP) grating, available in standard panels and sizes. It is manufactured by interweaving continuous, thoroughly wetted, fiberglass roving with thermosetting resin systems. Typical applications include floor systems, walkways, work platforms, trench covers & catwalks. GatorGrate™ has been successfully used in many industries – including food processing, beverage, chemical processing, water & wastewater treatment, metal finishing, pulp/paper, transportation, pharmaceutical, textile, oil/gas & mining/smelting/refining.
Standard GatorGrate™ resin systems are made from premium grade resins. Special resin systems and colors are available on special order. All GatorGrate™ resin systems incorporate an ultraviolet (UV) inhibitor. Available Top Surfaces are:
- Grit top – Integral, embedded silica sand, to a nominal depth of 3/16”
- Meniscus – Concave, half-moon cross-section
- Applied Grit – Epoxy grit bonded to meniscus top panels
FRP Cable Tray
Since 1978, AMICO Seasafe Fiberglass Cable Tray Systems have been tested and proven in the harsh environment of the offshore oil and gas industry. Subject to the corrosive conditions inherent in petroleum products, plus the daily punishment of exposure to wind, weather and saltwater – AMICO Seasafe Cable Tray has stood up! AMICO Seasafe Cable Tray gives you the load capacity of steel plus the inherent characteristics afforded by our in-house Pultrusion Technology: non-conductive, non-magnetic and corrosion-resistant.
Although light in weight, their strength-to-weight ratio surpasses that of equivalent steel products. AMICO Seasafe Cable Tray will not rust, nor do they ever require painting. Available in both polyester and vinylester resin systems, they are manufactured to meet ASTM E-84, Class 1 Flame Rating, and self-extinguishing requirements of ASTM D-635. A surface veil is applied during the pultrusion process to ensure a resin-rich surface for superior corrosion resistance as well as an ultraviolet exposure barrier. Cable Tray colors: Dark gray (polyester resin) and Beige (vinylester resin). Custom colors are available on request.
FRP Ladders, Rails & Platforms
Since 1978, the U.S. Coast Guard approved AMICO Seasafe Fiberglass Ladder, Rails and Platforms Systems have been tested and proven in the harsh environment of the offshore oil and gas industry. Subject to the corrosive conditions inherent in petroleum products, plus the daily punishment of exposure to wind, weather and saltwater – Seasafe Cable Tray has stood up! AMICO Seasafe Fiberglass Ladder, Rails and Platforms Systems give you the load capacity of steel plus the inherent characteristics afforded by our in-house Pultrusion Technology: non-conductive, non-magnetic and corrosion-resistant. Although light in weight, their strength-to-weight ratio surpasses that of equivalent steel products. AMICO Seasafe Fiberglass Ladder, Rails and Platforms Systems will not rust, nor do they ever require painting. Available in both polyester and vinylester resin systems, they are manufactured to meet ASTM E-84, Class 1 Flame Rating and self-extinguishing requirements of ASTM D-635.
A surface veil is applied during the pultrusion process to ensure a resin-rich surface for superior corrosion resistance as well as an ultraviolet exposure barrier. AMICO Seasafe Fiberglass Ladder, Rails and Platforms Systems come in two colors; Gray (polyester resin) and Beige (vinylester resin). Custom colors are available on request. The NEMA loadings are load-tested in accordance with NEMA FG-1 guidelines